济南风管遇到下列难题怎么处理？

发布人：   发布时间：2023-12-23 17:22:22

一、自然通风镀锌板风管应在运输过程中避免被破坏的风管。

1、 Natural ventilation galvanized sheet air ducts should avoid damaged ducts during transportation.

二、当玻璃纤维夹芯板的镀锌板风管端口号是切割面时，运用胶布或强力胶密封性，避免玻璃纤维在安装法兰联接件以前曝露和分散化。

2、 When the galvanized air duct port number of the fiberglass sandwich panel is the cutting surface, use adhesive tape or strong adhesive for sealing to avoid exposure and dispersion of fiberglass before installing flange connectors.

三、当空气镀锌板风管选用路面自带配组装时，由于自作用力的弯折，自带配长短比较有限，避免气体镀锌板风管毁坏组员页面。

3、 When using road mounted assembly for air galvanized sheet air ducts, the length of the built-in assembly is relatively limited due to the bending of the self acting force, to avoid damaging the team member page of the gas galvanized sheet air duct.

四、轴竖直自然通风镀锌板风管组装，由于空间小，不方便维护保养以后，因而角铁法兰风管一般选用外衣联接提升优点的水平和抗压强度，并使法兰“嗯”方式，钢衣服架挂在耳的角铁法兰立即并没有设定的适用。

4、 The assembly of galvanized sheet air ducts with vertical natural ventilation, due to the small space, is not convenient for maintenance and upkeep. Therefore, angle iron flange air ducts are generally connected by outer clothing to improve the horizontal and compressive strength of the advantages, and the flange "hmm" method is used. The angle iron flange of the steel clothes rack hanging on the ear is not immediately applicable.

一样在针对镀锌风管开展组装的全过程之中也需要多注意一下，因为它实际操作噪音大，并且应用周期短，因此必须为此开展一下关心才可以。镀锌风管的使用注意事项针对镀锌风管而言它凭着其优良的防火性能能不错的应用于净化设备送到风管、家用空调风管、行业送排风系统风管、系统吸排风管、矿井抽放瓦斯管、矿井涂胶带吹风筒等诸多场所。

It is also necessary to pay more attention to the assembly process of galvanized air ducts, as they have high operating noise and short application cycles. Therefore, it is necessary to pay attention to them. Precautions for the use of galvanized air ducts. For galvanized air ducts, they can be well applied in many places such as air ducts for purification equipment, household central air conditioning air ducts, industry air supply and exhaust system air ducts, environmental protection system suction and exhaust air ducts, mine gas drainage pipes, mine tape blowing tubes, etc. due to their excellent fire resistance performance.