通风管道加工系统布局要减小阻力处理

发布人：   发布时间：2023-09-23 10:28:49

通风设备我们都很熟悉，通风管道是连接风机空气处理设备和进风口的管道，是通风设备的重要组成部分。设计通风管道时，应注意通风管道中的阻力，设应尽可能减小阻力。.设计通风管道时，弯头应尽可能少，两个弯头之间的距离应较大。当两弯头之间的距离为管径的3倍时，阻力增加约80%。

We are all familiar with ventilation equipment, and ventilation ducts are important components that connect the fan air handling equipment and the air inlet. When designing ventilation ducts, attention should be paid to the resistance in the ducts, and the design should minimize the resistance as much as possible When designing ventilation ducts, the number of elbows should be minimized and the distance between the two elbows should be relatively large. When the distance between the two elbows is three times the pipe diameter, the resistance increases by about 80%.

如果是5倍，只会增加30%。自通风管道问世以来，由于其自身的特点和低价席卷了整个市场，受到许多制造商的欢迎。在使用中，要学会该学会维护和清洁通风管道，以便更好地发挥自己的作用。实用：这点应该是重要的一点,也是客户们所追求的一点,只有达到了工程的效果,这样客户才能认可我们的产品。

If it is 5 times, it will only increase by 30%. Since the introduction of ventilation ducts, they have swept the entire market due to their own characteristics and low prices, and have been welcomed by many manufacturers. In use, it is important to learn how to maintain and clean ventilation ducts in order to better play their role. Practical: This should be an important point and also a pursuit of customers. Only by achieving the engineering effect can customers recognize our products.

通风管道加工系统布局要减小阻力。

The layout of the ventilation duct processing system should reduce resistance.

不同含尘气体性质不同，则净化的分段处理应不同，当污染源多时可以集中在一个净化系统中，也可分为几个系统，但出现污染物混合会引起燃烧爆炸危险不同温度和湿度的气体，混合后出现管道内结露粉尘或气体性质不同，影响回收或净化效率的。

If the properties of different dusty gases are different, the segmented treatment of purification should be different. When there are multiple sources of pollution, they can be concentrated in one purification system or divided into several systems. However, mixing pollutants can cause combustion and explosion hazards. Gases with different temperatures and humidity may result in condensation of dust or gas properties in the pipeline after mixing, which affects recovery or purification efficiency.

管道加工系统布局中要保证整体系统的漏损小，确保吸尘口的有足够的风量。

In the layout of the pipeline processing system, it is necessary to ensure that the overall system has minimal leakage and sufficient air volume at the vacuum cleaner.